Wunderbar Double Row Cultivator Bundle w/ 9 S-Tines & Sweeps

Double Row Cultivator Bundle with (9) S-Tines and Sweeps

Cultivate Crops

Design your own Cultivator by adjusting the S-Tines to accomodate your rows.


Woodward Crossings' Wunderbar 3 Pt. Hitch ToolKit --Because it's Marvelously Wonderful!

Your Double Row Cultivator Bundle Package Includes:


(1) #CAT 1 3 Pt. Wunderbar Hitch

Heavy Duty - Up to 85 HP

Includes Pins

 

Cat I Hitch Pins:

 

 Diameter

 

.750"

 

Useable Length

 

2.750"

 

Overall Length

 

4.500"

WUNDERBAR 3 PT. HITCH DIMENSIONS:

17" from Top Pin to Lower Pin
Upper Link is 3/4"
Lower Links are 7/8"
Pin to Pin - Center to Center -  26"-28


(2) 4 Ft. #HT02-04-L4 2 x 2 x 1/4" Toolbars

 Note: 

6 Ft. Toolbar Can be Ordered in lieu of the 4 Ft. Toolbar at Check Out, however

there is an Add'l Cost for the Length, Weight & Oversize Shipping Upcharge

(9) Standard S-Tines, 32mm X 10mm X 560mm 14 1/2" Bar to Shank Bottom

(9) Bolts for Sweeps

(9) 7" Sweeps

(9) S-Tine Clamps

You will need (9) 7/16" x 3" Carriage Bolts

 

(2) Spacer Bars to make it a 2-Row

 

More Pics Below of the 3 Pt. Hitch

 


 

 

 

 

 

 

 

 

 

Assembly Below:


 

Snug up Toolbar on the 3 Pt. Hitch with a 1 5/16" Air Ratchet

Add the (2) Spacer Bars and insert another Toolbar and Snug up tightly

Last Steps:
Bolt on Sweeps.

 

Clamp on the S-Tines


 You will need (9) 7/16" x 3" Carriage Bolts


Add to the Bundle to Build Your Own Furrower, Disc Hiller, Middlebuster & More

 It's All About Versatility!

With Just 1 Hitch and a Toolbar,

You Can Build Many Implements!


 


2 Toolbars, One Hitch and Create Many Implements in Just a Few Minutes!

Dig Potatoes by Adding a Shank, Shank Clamp and a High Sweep Furrower

 

Hill Potatoes & Build Rows to Keep Dirt Close to Crops by Adding Disc Hillers and Disc Hiller Clamps

 

Add a Flat Shank, Flat Shank Clamp and a High Wing Furrower to make a Potato Plow or Middlebuster


 

 

 

Wowsers! Above is a pic submitted by David Mastin of New York.

 

Showing our CAT I 3 Pt. Hitch, (2) 18" Spacers, 6 Ft. Toolbars, our 5/8" Shanks, and Straight Chisel Spikes.

 

David painted his toolbars John Deere Green.  Quite impressive! Thanks, Dave for Sharing!

 

More Tillage Options Below:

Email us the part numbers desired for price quote and availability:


Tools Needed:

 

1 5/16” Socket to snug up the Toolbar on the 3 Pt. Hitch

 

1 1/8 Socket to snug up the Disc Hiller Clamps to the toolbar

 

9/16” wrench to tighten up the Disc Hillers in the Disc Hiller Clamp

 

5/8” Wrench to snug up Flat Shank to the Flat Shank Clamp

 

¾” Wrench to snug up Flat Shank Foot Pieces

 

(2) 3/8” x 3” bolts and washers to affix the Furrower to the Foot Piece

 

9/16” Wrench to snug up the bolts to Foot Piece and Furrower

 

Snug up Elliptical Bolts on S-Tines  with 9/16” wrench

 

3/8” x 3 Carriage bolts for S-Tine Clamps and 7/16” Nuts  to fasten the S-Tine Clamps to the Toolbar

 

11/16” wrench to snug up the bolts on the S-Tine Clamps

Create Your Own 2-Row Cultivator and More with the Wunderbar 3 Pt. Hitch Module!
Click To Enlarge
  • Item #: DRCB
  • Manufacturer: Woodward Crossings
  • Manufacturer's Product Number: DRCB
  * Marked fields are required.
*
*
*
*
*
Qty*
Price $615.00
Availability Inventory

Related Items

Reviews (0) Write a Review
No Reviews. Write a Review