Wunderbar Disc Hiller Bundle w/ Hitch, Hillers, & Clamps
Disc Hiller Bundle
Hill Potatoes & Build Rows to Keep Dirt Close to Crops by Adding Disc Hillers and Disc Hiller Clamps
Create Hills for Planting
Woodward Crossings' Wunderbar 3 Pt. Hitch ToolKit --Because it's Marvelously Wonderful!
Your Disc Hill Bundle Package Includes:
(1) #CAT 1 3 Pt. Wunderbar Hitch
Heavy Duty - Up to 85 HP
Cat I Hitch Pins:
WUNDERBAR 3 PT. HITCH DIMENSIONS:
17" from Top Pin to Lower Pin
Upper Link is 3/4"
Lower Links are 7/8"
Pin to Pin - Center to Center - 26"-28
(1) 4 Ft. #HT02-04-L4 2 x 2 x 1/4" Toolbar
6 Ft. Toolbar Can be Ordered in lieu of the 4 Ft. Toolbar at Check Out, however
there is an Add'l Cost for the Length, Weight & Oversize Shipping Upcharge
(2) #R22Wood Disc Hiller Clamps
(2) #72H31752 16" Disc Hillers
More Pics Below of the 3 Pt. Hitch
3 Pt. Hitch Can Ship FedEx Ground
Snug up Toolbar on the 3 Pt. Hitch with a 1 5/16" Air Ratchet
Slide on the Disc Hiller Clamps and then Insert the Disc Hillers- Tighten Bolts.
Add to the Bundle to Build Your Own Furrower, Cultivator, Middlebuster and So Much More
It's All About Versatility!
With Just 1 Hitch and a Toolbar,
You Can Build Many Implements!
Wowsers! Above is a pic submitted by David Mastin of New York.
Showing our CAT I 3 Pt. Hitch, 18" Spacers, 6 Ft. Toolbars, our 5/8" Shanks, and Straight Chisel Spikes.
David painted his toolbars John Deere Green. Quite impressive! Thanks, Dave for Sharing!
One Toolbar, One Hitch and Create Many Implements in Just a Few Minutes!
Dig Potatoes by Adding a Shank, Shank Clamp and a High Sweep Furrower
Cultivate Crops by adding S-Tines, S-Tine Clamps and Sweeps
By using 2 "Spacer Bars" and Adding an Additional Toolbar
You Can Make Your Own 2-Row Cultivator and More!
Spacer Bars, Toolbars & Attachments Sold Separately
More Tillage Options Below:
Email us the part numbers desired for price quote and availability:
1 5/16” Socket to snug up the Toolbar on the 3 Pt. Hitch
1 1/8 Socket to snug up the Disc Hiller Clamps to the toolbar
9/16” wrench to tighten up the Disc Hillers in the Disc Hiller Clamp
5/8” Wrench to snug up Flat Shank to the Flat Shank Clamp
¾” Wrench to snug up Flat Shank Foot Pieces
(2) 3/8” x 3” bolts and washers to affix the Furrower to the Foot Piece
9/16” Wrench to snug up the bolts to Foot Piece and Furrower
Snug up Elliptical Bolts on S-Tines with 9/16” wrench
3/8” x 3 Carriage bolts for S-Tine Clamps and 7/16” Nuts to fasten the S-Tine Clamps to the Toolbar
11/16” wrench to snug up the bolts on the S-Tine Clamps
Pictured above is our Cat I Hitch, (4) Disc Hillers w/Round Shank Clamps on a 2 Row Toolbar Setup w/ Spacer Bars & Gauge Wheels