One-Row Cultivator Set w/4 S-Tines, Sweeps- No Hitch or Toolbar

Single Row Cultivator Set w/

(4) 7" S-Tines, Sweeps, Bolts & Clamps

 


 

Just add the One Row Cultivator Set to our Wunderbar 3 PT. Hitch and Toolbar

to Make it a One Row Cultivator

 

Cultivate Crops

Design your own Cultivator by adjusting the S-Tines to accomodate your rows.

3 Pt. Hitch and Toolbar Not Inculded

Your Single Row Cultivator Set Includes:

 

(4) Standard S-Tines, 32mm X 10mm X 560mm 14 1/2" Bar to Shank Bottom

(4) Bolts for Sweeps

(4) 7" Sweeps

(4) S-Tine Clamps

You will need (4) 7/16" x 3" Carriage Bolts

 

Just add the One Row Cultivator Set to our Wunderbar 3 Pt. Hitch and Toolbar

to Make it a One Row Cultivator 

Pics Below of the 3 Pt. Hitch Setup:


 

 

 

 

 

 

3 Pt. Hitch Can Ship FedEx Ground

 

 

 

Assembly Below:


 

Snug up Toolbar on the 3 Pt. Hitch with a 1 5/16" Air Ratchet


Last Steps:
Bolt on Sweeps.

 

Clamp on the S-Tines


 You will need (4) 7/16" x 3" Carriage Bolts

Add to the Set to Build Your Own Furrower, Disc Hiller, Middlebuster & More

 

It's All About Versatility!

With Just 1 Hitch and a Toolbar,

You Can Build Many Implements!


 


One Toolbar, One Hitch and Create Many Implements in Just a Few Minutes!

Dig Potatoes by Adding a Shank, Shank Clamp and a High Sweep Furrower

 

 

Hill Potatoes & Build Rows to Keep Dirt Close to Crops by Adding Disc Hillers and Disc Hiller Clamps

 

Add a Flat Shank, Flat Shank Clamp and a High Wing Furrower to make a Potato Plow or Middlebuster


 

 

By using 2 "Spacer Bars" and Adding an Additional Toolbar

You Can Make Your Own 2-Row Cultivator and More!

Spacer Bars, Toolbars & Attachments Sold Separately

 

 

 

Wowsers! Above is a pic submitted by David Mastin of New York.

 

Showing our CAT I 3 Pt. Hitch, (2) 18" Spacers, 6 Ft. Toolbars, our 5/8" Shanks, and Straight Chisel Spikes.

 

David painted his toolbars John Deere Green.  Quite impressive! Thanks, Dave for Sharing!

 

More Tillage Options Below:

Email us the part numbers desired for price quote and availability:


Tools Needed:

 

1 5/16” Socket to snug up the Toolbar on the 3 Pt. Hitch

 

1 1/8 Socket to snug up the Disc Hiller Clamps to the toolbar

 

9/16” wrench to tighten up the Disc Hillers in the Disc Hiller Clamp

 

5/8” Wrench to snug up Flat Shank to the Flat Shank Clamp

 

¾” Wrench to snug up Flat Shank Foot Pieces

 

(2) 3/8” x 3” bolts and washers to affix the Furrower to the Foot Piece

 

9/16” Wrench to snug up the bolts to Foot Piece and Furrower

 

Snug up Elliptical Bolts on S-Tines  with 9/16” wrench

 

3/8” x 3 Carriage bolts for S-Tine Clamps and 7/16” Nuts  to fasten the S-Tine Clamps to the Toolbar

 

11/16” wrench to snug up the bolts on the S-Tine Clamps

Single Row Cultivator Set w/4 S-Tines, Sweeps-No Hitch, Toolbar
Click To Enlarge
  • Item #: SRCS
  • Manufacturer: Woodward Crossings
  • Manufacturer's Product Number: SRCS
  * Marked fields are required.
*
*
*
*
Qty*
Price $115.00
Availability Inventory

Related Items

Reviews (0) Write a Review
No Reviews. Write a Review