1" Sweep to Bolt on a Standard S-Tine Cultivator System
Build Your Own Cultivator!
76A380 Sweep 1
1" Sweep to Bolt on a Standard S-Tine
Sweeps are 1/4” thick, made to fit the Danish
“S” tine and other field preparation equipment
of this type.
Also Available to Create Your Own Cultivator:
Clamp for Danish S-Tine to Fit on a 2”x2” Toolbar on a 3 Pt. Hitch Below (Sold Separately) Can Be Ordered at Checkout
76A386 Danish S-Tine Clamp (Sold Separately)
Also available at checkout are the following sweeps, tines and bolts to build your cultivator.
Sweep is to be attached to the bottom of the S-Tine pictured above (Sold Separately)
76A380 Sweep 1 (Not Included)
76A382 Sweep 4 (Not Included)
76A383 Sweep 7 (Not Included)
7A9080 Bolts to Attach Sweeps to S-tines (Sold Separately)
HT02-04-L4 2 x 2 Toolbar for a 3 Point Hitch (Sold Separately)
Suggested Setup in Pics Below:
Snug up Elliptical Bolts on S-Tines with 9/16” wrench
You will need 3/8” x 3 Carriage bolts for S-Tine Clamps and 7/16” Nuts to fasten the S-Tine Clamps to the Toolbar
11/16” Wrench to snug up the bolts on the S-Tine Clamps